Plant profile

Bolbitis Heteroclita

Bolbitis heteroclita

Common names: Bolbitis Heteroclita, Bolbitis heteroclita

Hardscape, Midground, RipariumSlow

Send Us A photo, be a contributor :)

Countries of origin

Good fit for your tank?

Good fit for

Wet hardscape, ripariums, paludariums, and monitored submerged displays
Shrimp aquariums needing grazing surfaces or shelter
Hardscape-focused layouts with gentle circulation
Keepers willing to thin, clean, and inspect slow growth

Think carefully if

The aquarium is newly cycled or already struggling with algae
Debris regularly settles on plants and hardscape
Correct submerged, floating, or emersed placement is not available
This accepted Asian fern is a helophyte or wet-ground fern. Some aquarium forms adapt underwater, while others perform better with emersed foliage.

A medium moss, fern, liverwort, floating plant, or humid-enclosure plant with variable simple to divided fern fronds. Best used for wet hardscape, ripariums, paludariums, and monitored submerged displays; correct placement is essential.

Growth and Appearance

Usual appearance

This medium plant has variable simple to divided fern fronds. Its usual colour is medium to deep green. Shape, density, and colour can vary with light, nutrients, flow, temperature, trimming, and the supplied specimen.

It produces fronds from a creeping rhizome, but some trade forms may perform better emersed or partly emersed than permanently submerged.

It is normally used for wet hardscape, ripariums, paludariums, and monitored submerged displays. During the first few weeks, watch for firm growing tissue, new attachment points, roots, shoots, or fronds rather than expecting rapid coverage.

Requirements

Substrate: Use hardscape attachment for mosses and rhizome ferns, calm surface space for floating plants, and moist emersed substrate for terrestrial or humidity loving ferns. do not bury fern rhizomes.
Water-column feeder: Yes

Essentials

Start with low to medium light. Increase light only after healthy growth is established.
Attach the rhizome to rock or wood and keep it above the substrate.
Keep temperature and water conditions stable rather than chasing one exact value.
Provide enough circulation to prevent debris buildup without tearing delicate tissue.
Use a complete fertiliser carefully when the aquarium does not already supply enough nutrients.
Use clean water and gentle to moderate circulation around the fronds.

Optional improvements

Stable injected CO₂ may improve submerged moss and fern growth where recommended.
Regular gentle cleaning can prevent debris from smothering fine moss or liverwort tissue.
A mature aquarium usually reduces the risk of early algae covering slow plants.

Beginner setup checklist

Cycled, filtered aquarium or suitable humid enclosure
Low or moderate light
Correct submerged, floating, or emersed placement
Gentle water movement
Consistent fertilising where needed
Clean scissors and tweezers
No buried rhizome or crown

CO₂ guidance

Stable injected CO₂ is recommended for the best submerged growth, although it is not automatically required. It may improve establishment, branching, colour, density, and recovery after trimming.

CO₂ should remain stable and be balanced with light, nutrients, circulation, and oxygen. Do not increase light sharply simply because CO₂ is present.

For floating and emersed plants, access to atmospheric CO₂ means surface condition, humidity, and correct placement are more important than injection.

Planting and Care

Growth rate: Slow
Growth form: Emersed, Epiphyte, Fern, Rhizome
Rooting type: Epiphyte
Propagation: Plantlets, Rhizome Division
Emersed growth: Yes

Preparation

Remove pots, foam, wire, and rock wool.
Rinse the roots and rhizome and remove fully decayed fronds.
Do not divide a weak plant merely to create more portions.

Positioning

Place the plant on rock or wood with the rhizome visible.
Roots may reach the substrate, but the rhizome must not be buried.
Leave space around the fronds for water movement and future growth.

Attachment methods

Thread: tie the plant loosely until it grips the surface.
Fishing line: use a loose transparent wrap and check that it does not cut into the growth.
Cyanoacrylate super glue gel: use tiny drops on roots, rhizome undersides, or a few moss strands. Do not coat the whole plant.
Mesh: spread moss or liverwort in a thin layer and avoid crushing it.

Choose wood or stone with gentle circulation. Keep fern rhizomes fully exposed.

Frond trimming

Use clean scissors to remove a damaged or heavily algae-covered frond close to the rhizome.
Do not cut into the rhizome or remove a large share of healthy fronds at once.
Thin crowded old fronds so water can reach the rhizome.
Healthy rhizome divisions and mature plantlets can be replanted.

Propagation by rhizome division and plantlets

Wait until the rhizome has more than one healthy growing section.
Choose a section with several fronds and preferably roots.
Make one clean cut through the rhizome with sterile scissors or a blade.
Attach the new section to hardscape with the rhizome exposed.
Separate plantlets only after they have several leaves and visible roots.

Propagate only healthy growth. Allow weak, newly imported, or melting plants to recover first.

Normal adjustment

Transport, handling, and a change from nursery conditions can temporarily slow growth or damage older tissue.

Normal signs include firm rhizomes or growing tissue, new roots, small shoots, plantlets, or slowly developing fronds.
Repeated loss of new submerged fronds may mean the trade form is better kept emersed.
Colour and form may change after several weeks underwater or emersed.

Signs needing attention

Soft spreading decay, a dark mushy rhizome, repeated loss of every new shoot, or a foul-smelling mat.
Algae and debris covering most new growth.
Floating plants repeatedly sinking or becoming waterlogged.
Emersed plants losing all leaves because humidity or root moisture is too low.

This accepted Asian fern is a helophyte or wet-ground fern. Some aquarium forms adapt underwater, while others perform better with emersed foliage.

Suitability and Problems

Shrimp suitability: Excellent
Goldfish resistance: Low
Fish damage risk: Moderate
Melt risk: High
Algae susceptibility: Moderate high

Common problems

Plant turns brown or transparent: Adaptation, excessive heat, trapped debris, unsuitable submersion, physical damage, or unstable conditions may be involved.
Algae covers moss or fern leaves: Slow growth, excessive light, unstable CO₂, trapped waste, or weak circulation may contribute.
Moss, liverwort, or fern portion detaches: The attachment may be weak, the clump may be too thick, or fish and maintenance work may be disturbing it.
Little or no visible growth: Slow growth can be normal. Low nutrients, unsuitable temperature, unstable CO₂, repeated disturbance, or incorrect placement can also delay growth.
Floating leaves become wet, sink, or decay: Strong surface flow, splashing, condensation, overcrowding, or transport damage may be involved.

Do not diagnose from appearance alone

Yellowing, holes, pale growth, browning, slow growth, or weak fronds can result from several causes. Possible causes include light, CO₂, fertilising, temperature, debris, poor circulation, adaptation, physical damage, or unsuitable submerged placement.

Safe checking order

Review recent water, temperature, lighting, and equipment changes.
Compare symptoms on new growth with symptoms on old growth.
Inspect the rhizome, crown, attachment point, or underside of the mat for decay.
Check whether debris or algae is blocking light and circulation.
Review fertilising and CO₂ consistency where applicable.
Confirm that floating leaves stay dry and emersed plants remain humid.
Change one variable at a time and judge improvement from new growth.

Old damaged tissue will not repair itself. Remove only material that is fully decayed or no longer useful.

Who this plant suits

Beginner tanks: Better for experienced keepers because permanent submersion or botanical identity is uncertain.
Shrimp tanks: usually suitable after rinsing and quarantine, with fine growth providing grazing and shelter.
Low-tech tanks: many mosses and Java Fern forms grow without injected CO₂, though growth may be slow.
High-tech tanks: stable CO₂ can improve density and recovery but may also increase trimming needs.
Nano aquariums: suitable for miniature forms when they are trimmed and kept free of debris.
Community aquariums: suitable with fish that do not uproot, shred, or repeatedly cover the plant with waste.

Important limitations

Goldfish and plant-eating fish may pull apart moss, eat floating plants, or damage soft fronds.
Dense moss and fern clumps collect debris and can develop algae when circulation is weak.
Floating plants can block light and gas exchange when not thinned.
This accepted Asian fern is a helophyte or wet-ground fern. Some aquarium forms adapt underwater, while others perform better with emersed foliage.

Plant Decision Guide

Choose it for wet hardscape, ripariums, paludariums, and monitored submerged displays.
Choose a low-tech approach when slow growth and regular cleaning are acceptable.
Choose a CO₂-assisted approach when denser moss or faster fern recovery is important and the system can remain stable.
Think carefully if the aquarium is new, algae-prone, very warm, or heavily stocked.
Think carefully if loose fragments could enter filters or spread to unwanted areas.
Check local regulations before keeping or disposing of floating plants.
Inspect the actual specimen because moss and fern trade names are not always used consistently.

Identification and Origin

Accepted name: Bolbitis heteroclita
Genus: Bolbitis
Species epithet: heteroclita
Family: Polypodiaceae
Origin: Asia, Australia, Bangladesh, Bhutan, Brunei, China, India, Indonesia, Japan, Malaysia, Micronesia, Myanmar, Nepal, Papua New Guinea, Philippines, Singapore, Solomon Islands, Taiwan, Thailand, Vietnam

Have you grown this plant?

You can write a note about what worked for you, or send a photograph. We check everything before it appears here.

Share a note or photo