Plant profile

Riccia Fluitans

Riccia fluitans

Common names: Riccia Fluitans, Riccia fluitans

Floating, Foreground, HardscapeFast

Send Us A photo, be a contributor :)

Origin

Cosmopolitan

Good fit for your tank?

Good fit for

Floating fry cover or tightly secured foreground cushions
Shrimp aquariums needing grazing surfaces or shelter
Hardscape-focused layouts with gentle circulation
Keepers willing to thin, clean, and inspect slow growth

Think carefully if

The aquarium is newly cycled or already struggling with algae
Debris regularly settles on plants and hardscape
Correct submerged, floating, or emersed placement is not available
Riccia naturally floats and does not attach by roots. Submerged mats must be held securely and trimmed before lower layers become shaded and detach.

A small moss, fern, liverwort, floating plant, or humid-enclosure plant with forked ribbon-like thalli that form bright floating cushions. Best used for floating fry cover or tightly secured foreground cushions; correct placement is essential.

Growth and Appearance

Usual appearance

This small plant has forked ribbon-like thalli that form bright floating cushions. Its usual colour is light to bright green. Shape, density, and colour can vary with light, nutrients, flow, temperature, trimming, and the supplied specimen.

It naturally floats as interlocking branched tissue and can be forced underwater only when securely restrained.

It is normally used for floating fry cover or tightly secured foreground cushions. During the first few weeks, watch for firm growing tissue, new attachment points, roots, shoots, or fronds rather than expecting rapid coverage.

Requirements

Substrate: Use hardscape attachment for mosses and rhizome ferns, calm surface space for floating plants, and moist emersed substrate for terrestrial or humidity loving ferns. do not bury fern rhizomes.
Water-column feeder: Yes

Essentials

Start with low to medium light. Increase light only after healthy growth is established.
Float it freely or secure a thin layer to mesh or stone.
Keep temperature and water conditions stable rather than chasing one exact value.
Provide enough circulation to prevent debris buildup without tearing delicate tissue.
Use a complete fertiliser carefully when the aquarium does not already supply enough nutrients.
Trim often so lower layers do not become shaded and detach.

Optional improvements

Stable injected CO₂ may improve submerged moss and fern growth where recommended.
Regular gentle cleaning can prevent debris from smothering fine moss or liverwort tissue.
A mature aquarium usually reduces the risk of early algae covering slow plants.

Beginner setup checklist

Cycled, filtered aquarium or suitable humid enclosure
Low or moderate light
Correct submerged, floating, or emersed placement
Gentle water movement
Consistent fertilising where needed
Clean scissors and tweezers
No buried rhizome or crown

CO₂ guidance

Stable injected CO₂ is recommended for the best submerged growth, although it is not automatically required. It may improve establishment, branching, colour, density, and recovery after trimming.

CO₂ should remain stable and be balanced with light, nutrients, circulation, and oxygen. Do not increase light sharply simply because CO₂ is present.

For floating and emersed plants, access to atmospheric CO₂ means surface condition, humidity, and correct placement are more important than injection.

Planting and Care

Growth rate: Fast
Growth form: Floating, Liverwort, Mat Forming
Rooting type: Rootless
Propagation: Division, Fragmentation

Preparation

Rinse the portion gently and remove brown or decaying tissue.
Separate thick compressed mats into thinner layers.

Placement

Float it freely for its natural growth form.
For a submerged cushion, spread a thin layer under mesh or tie it gently to stone.
Do not create a thick compressed mat because the shaded underside may rot and detach.

Optional submerged attachment

Spread a thin layer under fine mesh on stone or wood.
Use fine thread or hair netting without crushing the tissue.
Trim before the upper growth shades and releases the lower layer.

Trimming

Use clean sharp scissors and trim only the outer layer.
Remove loose cuttings immediately with a net or siphon.
Do not remove most of a newly attached mat at one time.
Thin dense inner growth when it traps debris or begins turning brown.
Healthy trimmings may be attached to new hardscape or floated where appropriate.

Light, regular trimming creates a denser and more defined shape. Neglected thick mats can detach or decay underneath.

Propagation by division

Select a clean healthy portion.
Divide it gently into several small clumps.
Attach each clump in a thin layer or float it where appropriate.
Keep circulation gentle while the new portions establish.

Propagate only healthy growth. Allow weak, newly imported, or melting plants to recover first.

Normal adjustment

Transport, handling, and a change from nursery conditions can temporarily slow growth or damage older tissue.

Normal signs include firm rhizomes or growing tissue, new roots, small shoots, plantlets, or slowly developing fronds.
Lower layers may brown when a mat becomes too thick.
Colour and form may change after several weeks underwater or emersed.

Signs needing attention

Soft spreading decay, a dark mushy rhizome, repeated loss of every new shoot, or a foul-smelling mat.
Algae and debris covering most new growth.
Floating plants repeatedly sinking or becoming waterlogged.
Emersed plants losing all leaves because humidity or root moisture is too low.

Riccia naturally floats and does not attach by roots. Submerged mats must be held securely and trimmed before lower layers become shaded and detach.

Suitability and Problems

Shrimp suitability: Excellent
Goldfish resistance: Low
Fish damage risk: Moderate
Melt risk: Moderate
Algae susceptibility: Moderate

Common problems

Plant turns brown or transparent: Adaptation, excessive heat, trapped debris, unsuitable submersion, physical damage, or unstable conditions may be involved.
Algae covers moss or fern leaves: Slow growth, excessive light, unstable CO₂, trapped waste, or weak circulation may contribute.
Moss, liverwort, or fern portion detaches: The attachment may be weak, the clump may be too thick, or fish and maintenance work may be disturbing it.
Little or no visible growth: Slow growth can be normal. Low nutrients, unsuitable temperature, unstable CO₂, repeated disturbance, or incorrect placement can also delay growth.
Floating leaves become wet, sink, or decay: Strong surface flow, splashing, condensation, overcrowding, or transport damage may be involved.

Do not diagnose from appearance alone

Yellowing, holes, pale growth, browning, slow growth, or weak fronds can result from several causes. Possible causes include light, CO₂, fertilising, temperature, debris, poor circulation, adaptation, physical damage, or unsuitable submerged placement.

Safe checking order

Review recent water, temperature, lighting, and equipment changes.
Compare symptoms on new growth with symptoms on old growth.
Inspect the rhizome, crown, attachment point, or underside of the mat for decay.
Check whether debris or algae is blocking light and circulation.
Review fertilising and CO₂ consistency where applicable.
Confirm that floating leaves stay dry and emersed plants remain humid.
Change one variable at a time and judge improvement from new growth.

Old damaged tissue will not repair itself. Remove only material that is fully decayed or no longer useful.

Who this plant suits

Beginner tanks: Suitable for a careful beginner who can keep debris, algae, and placement under control.
Shrimp tanks: usually suitable after rinsing and quarantine, with fine growth providing grazing and shelter.
Low-tech tanks: many mosses and Java Fern forms grow without injected CO₂, though growth may be slow.
High-tech tanks: stable CO₂ can improve density and recovery but may also increase trimming needs.
Nano aquariums: suitable for miniature forms when they are trimmed and kept free of debris.
Community aquariums: suitable with fish that do not uproot, shred, or repeatedly cover the plant with waste.

Important limitations

Goldfish and plant-eating fish may pull apart moss, eat floating plants, or damage soft fronds.
Dense moss and fern clumps collect debris and can develop algae when circulation is weak.
Floating plants can block light and gas exchange when not thinned.
Riccia naturally floats and does not attach by roots. Submerged mats must be held securely and trimmed before lower layers become shaded and detach.

Plant Decision Guide

Choose it for floating fry cover or tightly secured foreground cushions.
Choose a low-tech approach when slow growth and regular cleaning are acceptable.
Choose a CO₂-assisted approach when denser moss or faster fern recovery is important and the system can remain stable.
Think carefully if the aquarium is new, algae-prone, very warm, or heavily stocked.
Think carefully if loose fragments could enter filters or spread to unwanted areas.
Check local regulations before keeping or disposing of floating plants.
Inspect the actual specimen because moss and fern trade names are not always used consistently.

Identification and Origin

Accepted name: Riccia fluitans
Genus: Riccia
Species epithet: fluitans
Family: Ricciaceae
Origin: Cosmopolitan

Have you grown this plant?

You can write a note about what worked for you, or send a photograph. We check everything before it appears here.

Share a note or photo